Table of Contents
Advertisement
Panasonic Electric Works Fire & Security Technology Europe AB
MEW00290 Rev: 1
6
6.1
Technical Description External Presentation unit 1728
SW mode & Address setting
Each Ext. Presentation unit shall run in SW mode 1728 - 1587 or SW
mode 1728 – 1582, i.e. it can be used as two different types of units.
It shall also have a unique address on the line connected to the 1587
or 1582 board in the EBL512 c.i.e.
Instructions.
The SW mode 1728 – 1587 has to be used in EBL128 and an optional
RS485 transceiver component 4552 is required on the main board.
See EBL128 Planning Instructions.
SW mode setting
A brand new ext. Presentation unit has no SW mode. It is factory set
to "Not selected" (and is hereby not addressable).
powered it will automatically be ready for the "SW mode setting".
As an alternative, an ext. Presentation unit in operation
for the "SW mode setting" via the jumper "J4" in the unit. See the
following chapter.
When the ext. Presentation unit is ready for the "SW mode setting"
this is indicated by the LED "Alarms queued" (L2). The back-light is
turned on and the following information is shown in the display:
MODE SETTING!
Type XXXXXXXXXXXX
can be changed to one of the following:
XXXXXXXXXXXX
- Not selected
- 1728 - 1587
- 1728 - 1582
- 1735 - 1587
- 1736 - 1587
- 1826/28 - 1587
- 1826/28 - 1582
Scroll to the wanted SW mode
Store the selected SW mode with the push button "P2" (yellow) and
the unit will automatically be ready for the "Address setting ", see
below.
NOTE!
If the stored SW mode is 1728 – 1582 a language has to be set before
the address can be set
the display:
7
Also when a unit not in operation but with the mode and address set before,
is powered.
8
For an ext. Presentation unit is one of the following modes possible to use:
1728 - 1587 or 1728 - 1582. ("Not selected" can also be selected.)
9
If the stored SW mode is 1728 – 1587 a language will be downloaded via
the c.i.e.
Change = Black
Store = Yellow
8
with the push button "P1" (black).
9
. The following information will be shown in
11
See EBL512 Planning
When it is
7
can be ready
Advertisement
Table of Contents
