When Sharpening Anew Knife; Emery Wheel Applications - Wolf NEW PACER 100 Series Parts And Service Manual

Table of Contents

Advertisement

MAINTENANCE STONE SHARPENER SERIES ONLY
PAGES
8,
9,10
&
11
WHEN
SHARPENING A
NEW KNIFE
To engage sharpener, press starting lever
down as shown in the picture on page 7, Fig.
e,
#2. When first sharpening a new replace­
ment knife, depress tension button (#3 at
right) for two or three strokes of the sharpener
and then release the button. Allow the sharp­
ener to make two or three additional strokes
without the tension button depressed. The
new knife should be ready for cutting.
DEPRESS THE TENSIOI\J BUTTON ONLY
WHEN SHARPENING A NEW KNIFE. A burr
will result from over sharpening. It is advisable
to check new knives for burrs on bottom.
Remove burr with hand stone if they exist.
EMERY WHEEL APPLICATIONS
Most goods use two
#1280100 - 120
grit emery wheels.
Coarse material such as denim use two
#1280000 - 80
grit emery wheels.
For all wave style and notched style blades use two
#1280000 - 80
grit emery wheels.
TO ASSURE BEST PERFORMANCE
USE ONLY WOLF REPLACEMENT PARTS,
KNIVES AND SHARPENING STONES.
8

Advertisement

Table of Contents
loading

Table of Contents