Huawei SUN2000-2KTL-L1 User Manual page 42

SUN2000-(2KTL-5KTL)-L1
User Manual

Avoid scratching the core wire when stripping a cable.

The cavity formed after the conductor crimp strip of the OT terminal is crimped must wrap
the core wires completely. The core wires must contact the OT terminal closely.

Wrap the wire crimping area with heat shrink tubing or insulation tape. The heat shrink
tubing is used as an example.

When using a heat gun, protect the equipment from being scorched.
Figure 5-2 Crimping an OT terminal
(A) Core wire
(D) Hydraulic pliers
Step 2 Connect the PE cable.
Issue 01 (2020-04-17)
(B) Insulation layer
(E) Heat gun
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
(C) Heat shrink tubing
36