Connecting Pe Cables - Huawei SUN2000-2KTL-L1 User Manual

SUN2000-(2KTL-5KTL)-L1
User Manual
No.
3
4
5
Note a: The minimum cross-sectional area of the cable should be selected based on the
rated value of the AC fuse.

5.2 Connecting PE Cables

Precautions
Issue 01 (2020-04-17)
Cable Type
(Optional Outdoor shielded twisted
) Signal pair cable
cable

AC
output
power
a
cable

Single-core outdoor copper
PE cable
cable and M6 OT terminal
 The minimum cable diameter must comply with local cable standards.
 The factors that affect cable selection include the rated current, cable type, routing mode, ambient
temperature, and maximum expected line loss.
Copyright © Huawei Technologies Co., Ltd.
Not using the PE
equipotential point at the
AC output port: two-core
(L and N) outdoor copper
cable
Using the PE
equipotential point at the
AC output port:
three-core (L, N, and PE)
outdoor copper cable
5 Electrical Connection
Recommended
Specifications
 Conductor
cross-sectional area:
− Combined
crimping of cables
on the port: 0.20
–0.35 mm
2 2
mm
− Crimping the
cables on the port
without combining
2
them: 0.20 mm
2
mm
 Cable outer diameter:
− 4-hole rubber plug:
4–8 mm
2-hole rubber plug:
−
8–11 mm

Conductor
cross-sectional area: 4
–6 mm
2 2
mm
 Cable outer diameter:
10 mm–21 mm
–10 mm
2 2
4 mm
Source
Prepare
d by the
custome
r
–1
Prepare
d by the
custome
r
Prepare
d by the
custome
r
34