SUN2000-(2KTL-5KTL)-L1
User Manual
Figure 5-3 Connecting a PE cable
----End
5.3 Installing a WLAN Antenna
Procedure
Step 1 Remove the watertight cap from the ANT port.
Step 2 Install the washer to the ANT port on the chassis.
Step 3 Install the WLAN antenna.
Ensure that the WLAN antenna is installed securely.
Issue 01 (2020-04-17)
Ensure that the PE cable is connected securely.
It is recommended to use the right ground point for grounding, and the other is a reserved
ground point.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
37