IBM 9009-41A Manual page 94

Figure 61. Releasing the cable management arm
b) Swing the cable management arm away from the system.
In the image, the inner cable management arm tab is shown on the left side as you are facing the
system from the rear. However, the cable management arm can also be installed so that the inner
cable management arm tab is on the right side of the system.
CAUTION: To avoid causing damage to the arm, open the cable management arm just long
enough to complete these repairs.
6. Choose from the following options:
• If you completed the procedure with the system power turned off, continue with step "7" on page
80.
• If you completed the procedure with the system power turned on, continue with step "8" on page
82.
7. Using your labels, reconnect the power cords (A) to the system unit.
Fasten the power cords (A) to the system using the hook-and-loop fasteners (B) as shown in Figure
62 on page 81 or Figure 63 on page 82.
80 Power Systems: PCIe adapters for the 9009-41A, 9009-42A, or 9223-42H