Bosch 0 607 460 Series Original Instructions Manual page 15

OBJ_BUCH-2098-002.book Page 15 Wednesday, September 21, 2016 9:50 AM
Symbol Meaning
 Wear safety goggles.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
QC Quick-change chuck
Symbol for hexagon socket

Symbol for external drive
US fine thread
UNF (Unified National Fine
Thread Series)
G Whitworth thread
NPT National pipe thread
Right rotation
Left rotation
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.
Bosch Power Tools
Intended Use
The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.
Product Features
The numbering of the product features refers to the illustra-
Power output
tion of the pneumatic tool on the graphics page.
Unit of energy
1 Tool holder
(torque)
2 Torque sleeve
Mass, weight
3 Rotational direction switch
4 Utility clip
Length
5 Hose fitting
Time period, dura-
6 Connection socket at air intake
tion
7 On/Off switch (lever)
No-load speed
8 Clamping area (collar)
9 Auxiliary handle*
Air pressure
10 Air outlet with silencer
11 On/Off switch
12 Adjustment sleeve for screwing-depth stop
Air consumption
13 Supply-air hose
Unit of relative loud-
14 Hose clamp
ness
15 Exhaust-air hose, central
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Tool holder
Noise/Vibration Information
0 607 460 ...
Measured sound values determined according to
Connecting thread
EN ISO 15744.
Typically the A-weighted
noise level of the
pneumatic tool is:
Sound pressure level L
Rotational direction
Sound power level L
Uncertainty k
Wear hearing protection!
Vibration total values a
determined according to EN 28927:
Screws:
a
h
K
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN ISO 11148 and may be used to compare one
pneumatic tool with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the pneumatic tool. However if the pneumatic
tool is used for different applications, with different accesso-
ries or insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the expo-
sure level over the total working period.
English | 15
... 001 ... 401 ... 400
dB(A) 82 78 74
pA
dB(A) 93 89 85
wA
dB 0.8 0.8 0.8
(triax vector sum) and uncertainty K
h
2
m/s < 2.5 < 2.5 < 2.5
2
m/s 1.5 1.5 1.5
1 609 92A 37V | (21.9.16)