Menu Settings; Descaling; Auto-Off; Setting The Temperature - DeLonghi ECAM23.21 Series Manual

Please note :
If the appliance is not used for an extended period, place the
main switch (A8) in the 0 position (fig. 3).
Important!
To avoid damaging the appliance, never place the main switch
(fig. 3) in the 0 position until the appliance has been turned off
using the button.

MENU SETTINGS

When you access the settings menu by pressing the P button,
the following menu items can be selected: Descale, Auto-off,
Set temperature, Energy saving, Water hardness, Install filter,
Replace filter, Default values, Statistics.

Descaling

For instructions on descaling, see page 15.

Auto-off

The time can be changed so that the appliance switches off after
being idle for 15 or 30 minutes, or after 1, 2 or 3 hours.
To reprogramme auto-off, proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial (fig. 8) until the
on;
3. Press the button to select the function;
4. Turn the selection dial until the lights corresponding to the
number of hours before the appliance goes off automati-
cally come on:
15 minutes
30 minutes
1 hour
2 hours
3 hours
5. Press the button to confirm;
6. Press the button to exit the menu.
Auto-off is programmed.

Setting the temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the P button to enter the menu;
2. Turn the selection dial until the
3. Press the button;
4. Turn the selection dial until the lights corresponding to the
required temperature come on:
LOW
MEDIUM
5. Press the
6. Press the

Energy saving

Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
1. Press the P button to enter the menu;
2. Turn the selection dial until the E light comes on.
3. Press the
4. Press the
5. Press the
When the function is enabled, the E light remains on.
When in energy saving mode, a few seconds may elapse before
the first coffee is delivered as the appliance must heat up again.

Setting water hardness

For instructions on setting water hardness, see page 16.

Install filter

light comes
For instructions on how to install the filter, see the section
"Water softener filter" (page 16).

Replacing the filter

For instructions on how to replace the filter, see the section
"Water softener filter" (page 16).

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values.
1. Press the P button to enter the menu;
2. Turn the selection dial until the
3. Press the
5. Press the

Statistics function

This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the P button to enter the menu;
light comes on;
2. Turn the selection dial until the
3. Press the
4. When the selection dial is turned and the corresponding
-
11
HIGH
button to confirm;
button to exit the menu.
button. The OK light flashes.
button to enable or
saving mode;
button to exit the menu.
Please note :
button. The OK light flashes;
button to confirm and exit.
button;
light flashes, the following information is displayed:
how many coffees have been made;
disable energy
lights come on;
light comes on;