Preparation Of Beverages - SEVERIN Fino Multi KA4566 Instructions For Use Manual

Fino Multi KA4566

3. Preparation of beverages

8
The appliance is ready for operation as soon as it is connected to the mains
supply. All display elements are o .
Danger of scalding!
After preparation of beverages remove the strainer support (C to E)
from the brewing unit (A) by merely holding it at the handle since the
support itself and its contents are hot.
Important: Please check if su cient fresh, cold water (without gas) is
!
in the water reservoir (L). Please change water on a daily basis. Insert
the drainage grille (G) with or without drip tray (F), depending on
the size of the cup. Do not remove the water reservoir (L) during the
brewing process.
Important: The brewing process can be terminated any time by
!
pressing the Start/Stop button (H.5)
Note: Please remember to empty and clean the strainer support (C to E)
!
after use. Dispose biodegradable components with your organic waste.
.