Table Of Contents - Canon MX410 Network Setup Troubleshooting

Network Setup Troubleshooting
This manual describes problems that may be encountered when setting up a network and their possible
causes and solutions.
Find a description related to your problem and follow the solution.
For problems not described here or which occur after setup, refer to the on-screen manual: Basic Guide/
Advanced Guide.
Screens are based on Windows 7 Home Premium.
• Names of functions, etc. may differ from this manual depending on your access point or application
software.
Problems during Software Installation
The Target Access Point is Not Displayed (Detected) on the Detected Access Points
List Screen
An access point could not be detected. is Displayed
Check Access Point to Be Used Screen is Displayed
Check Settings Screen is Displayed
Set Printer IP Address Screen is Displayed
The Machine is Not Displayed (Detected) on the Detected Printers List Screen
WPS WCN Additional Computers Setup
Set Up New Printer Screen is Displayed
Problems during Network Setup
WPS
Multiple APs detected is Displayed
Failed to connect is Displayed
PIN codes do not match is Displayed
Other Troubleshooting Tips
Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security
Protocol (encryption standard), and Network Key
The Machine is Not Detected after the Network Environment is Changed
Reference Information
Configuring Wireless LAN Settings Manually
P.2
Restoring the Machine's Default LAN Settings to Perform Setup Again
P.2
Connection Checklist
P.2
P.3
P.3
The following symbols are used in this manual.
P.4
Instructions as notes for operation or additional explanations.
P.5
Description for Windows users.
Description for Macintosh users.
P.6
P.7
P.7
P.7
P.7
P.8
P.8
P.8
P.8
P.8
P.10
P.11