Page 3
Connecting The Phone Lines Before Wall jack After Wall jack (Phone Cord included with Canon printer) Next Previous...
Page 4
If Your Wall Plate Has Two Jacks Use the jack that supports the fax line. Previous Next...
Page 5
If Your Wall Plate Has One Jack For Two Lines If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics.
Page 6
Fax to Phone Line Connection First, connect one end of the supplied telephone cord to the telephone jack on the wall. Wall Jack (Phone Cord included with Canon printer) Previous Next...
Page 7
Fax to Phone Line Connection Next, connect the other end of the supplied telephone cord to the lower jack (labeled “L”) on the MX360 or MX410. Wall Jack (Phone Cord included with Canon printer) Previous Next...
Page 9
Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next...
Page 10
Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next...
Page 11
Step 5 Step 6 The “Receive mode set” screen will Press the OK button appear Previous Next...
Page 12
Step 7 Step 8 Ensure that “Fax only mode” is Use the Left or Right arrow button to select “Fax only mode” displayed Previous Next...
Page 13
Step 9 Step 10 The “Make advanced settings?” Press the OK button screen will appear Previous Next...
Page 14
Step 11 Step 12 Press the FAX button Your MX360 or MX410 is now set to FAX only mode. Notice that the mode is listed on the fax standby screen. Previous Next...
To Receive A Fax When a call comes in on the fax line, the MX360 or MX410 will answer the call and begin receiving the fax. You do not have to be home or interact with the MX360 or MX410 to receive a fax.