Laney CUB-SUPER Series User Manual page 4

CUB-RANGE
CUB-SUPER10 FEATURES
11
9 - BOOST LED - Indicates that the BOOST is engaged.
INPUT SOCKET
10 -
EXTERNAL SPEAKER. - Your CUB-SUPER10 is loaded with a HH Custom designed 8 Ohm Internal
11 -
speaker. Should you want to run an external speaker cabinet it can be connected here. Please use a
good quality SPEAKER cable. Connecting an external speaker cabinet will disconnect the internal
speaker. Please make sure you use the correct impedance of speaker cabinet from 8 - 16 Ohms.
FX LOOP SEND
12 -
guitar cable. This socket can also be used as a line out.
13 - FX LOOP RETURN - This is where you plug the OUT of your Effect(s). Use a high quality shielded
guitar cable.
14 - FOOTSWITCH SOCKET - This is where you plug in the footswitch. FS1-Mini optional extra. Enables
remote switching of the boost circuit. Ensure the boost switch (7) is switched in.
15 - POWER SOCKET
4
12
- Plug a good quality guitar lead in here.
- This is where you plug the INPUT of your Effect(s). Use a high quality shielded
- Plug in the supplied IEC power cord here
13
USER MANUAL
14
www.laney.co.uk
15