Multiple Longitudinal And Vertical And Horizontal Rows Installed; Anchor Bolt Positions - Mitsubishi Heavy Industries FDCA Series Technical Manual

• Pattern 3

Multiple longitudinal and vertical and horizontal rows installed

750
H=1000
or less
• Pattern 4
Multiple longitudinal and vertical and horizontal rows installed
750
H=1000
or less
(c) Notabilia for installation
1)

Anchor bolt positions

a) Use four anchor bolts (M12) to fix an outdoor unit's anchoring legs at all times. Ideally, an anchor bolt should protrude 20mm.
Unit
Anchor bolt positions
b) Base
• Install the unit so that it does not vibrate and doesn't make noise. Make sure the base is strong and that it is installed level.
• Provide a foundation that is at least as wide as the area shown by the shaded portion in the diagram above (wider than the
width between the front surface of the anchoring legs of the outdoor unit).
100
Front
800
800
800
Front
100
Front
500
800
800
800
Front
500
1350
850
( mark)
Unit leg
Foundation
H=1000 or less
1500
H=1000 or less
H=1500 or less
1500
H=1500 or less
107
- -
Unit: mm
750
H=1000
or less
750
H=1000
or less
Unit : mm