Msw Code - Sony DCR-HC65 Adjusting Manual

DCR-HC65

3-2. MSW Code

MSW when errors occur:
Information on MSW (mode SW) when errors occur
MSW when movement starts:
Information on MSW when movements starts when the mechanism position is moved (When the L motor is moved)
MSW of target of movement:
Information on target MSW of movement when the mechanism position is moved
Mechanical Position
← UNLOAD
BL BL
EJ ULE
LS chassis movement section
Lock released
Cassette compartment
Position
EJ
BL
ULE
SR
HL
STOP
R/P
NULL
BL BL
SR HL
Code
Position at which the cassette component lock is released, at the farthest unload side mechanically
4
at which the mechanism can move no further in the UNLOAD direction.
E BLANK code, at the boundary between codes.
EJECT completion position. when the cassette is ejected, the mechanism will stop at this position.
6 Cassette IN standby. The guide will start protruding out as the mechanism moves towards the
LOAD position.
2 Position at which it is possible to release the S ratchet.
A Guide loading are performed here.
Stop position in the loading state. The pinch roller separates, the tension regulator returns, and the
8
brake is imposed on both reels.
PB, REC, CUE, REVIEW, PAUSE, FF, REW positions. When pinch roller is pressed, and the tension
C regulator is ON, the mechanism is operating at this position in modes in which normal images are
shown.
0 Code not existing in the MD. Default value.
F Status before finding any mechanism position.
LOAD →
BL
STOP R/P
← A (MSB)
← B
← C
← D (LSB) (Fixed at "0")
Pinch roller pressing
Contents
6-56