Floor Monitor, Tripod, And Pole Mount Operation; Floor Monitor - Electro-Voice PXM‑12MP Series Installation Manual

PXM-12MP Powered Monitor
3

Floor monitor, tripod, and pole mount operation

3.1

Floor monitor

The PXM-12MP monitor is optimized for floor placement.
To setup the device as a monitor, do the steps that follow:
1.
2.
3.
4.
5.
6.
Electro-Voice
Make sure the surface is stable, level, and clear of debris.
Place the PXM-12MP on the surface.
Position the speaker at a distance relative to your position so that your head is on axis
with the speaker.
Feed the necessary cables through the cable routing hole to neatly and safely manage
cable clutter.
Power on the system and configure as outlined in the Quick setup section.
Make sure that the DSP MODE is set to MONITOR 1, MONITOR 2, or GUITARCAB.
Floor monitor, tripod, and pole mount operation | en
Installation manual
11
2019-10 | v01 | F.01U.363.983