Tripod, Pole Mount, And Floor Monitor Operation; Tripod Or Pole Mount - Electro-Voice EVL-ZLX-12P-BT Installation Manual

14 en | Tripod, pole mount, and floor monitor operation
3

Tripod, pole mount, and floor monitor operation

3.1

Tripod or pole mount

ZLX portable loudspeakers mount on a tripod stand or on a pole above a subwoofer.
Mounting a loudspeaker on a tripod stand
Figure 3.1: Full-Range models on a tripod stand
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the
!
tripod stand to be certain it is capable of supporting the weight of the loudspeaker.
Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1.
–
–
–
2.
3.
2019-05 | 03 | F.01U.319.253
Place the tripod stand on a level and stable surface.
Fully extend the legs on the tripod stand.
Do not compromise the tripod stands structural integrity by trying to make the stand
taller.
Do not attempt to suspend more than one loudspeaker on a stand designed for a single
loudspeaker.
Using two hands lift the loudspeaker.
Set the pole cup located on the bottom of the loudspeaker onto the pole.
Installation manual
ZLX Portable Loudspeaker Series
Electro-Voice