SC195-00
Error Name
Machine Serial Number Error
Pattern
D
Error Condition
This error is detected when the 11-digit machine serial number is incorrect.
Major Cause
Machine serial number was not entered or entered incorrectly
EEPROM on the BiCU board replacement failure
EEPROM on the BiCU board is defective.
BiCU is defective.
Solution
1.
Machine serial number not entered or entered incorrectly
Enter/re-enter the machine serial number. (SP5-811-004)
2.
Set the EEPROM on the BiCU board again.
3.
Replace the EEPROM on the BiCU board.
4.
Replace the BiCU board.
1.SC Codes
47