Bajaj Pulsar 135 BS VI Owner's Manual page 14

Control Switches
Right Handle Bar Switches
E. Starter Button :
Starter button operates the electric starter.
It is recommended to start the engine with
the transmission in neutral.
Vehicle in Gear - Press clutch lever &
operate starter button to start the engine.
F. Engine Kill Switch :
The engine kill switch is used for switching
ON & OFF the engine.
: Engine OFF
: Engine ON
F
E
10
AHO Feature
(Automatic Headlight 'ON')
There is no 'Light switch' on RH control
switch.
Ignition switch 'ON'
Engine 'ON'
Effect of pressing
'Pass Switch'
Ignition switch 'ON' & Engine Running
Speedometer illumination, Tail lamp, Number Plate
Lamp, Pilot Lamp & Control Switches Illumination will
get 'ON'
in addition to above, headlamp will get on as given
below.
Hi/Low beam Headlamp
Switch
Low beam Low beam 'ON' Hi beam 'ON'
Hi beam Hi beam
Speedometer illumination
Tail lamp, Number
Plate Lamp, Pilot
Lamp & Control Switches
Illumination will get 'ON'
In addition to above
Hi-beam will get 'ON'
Effect of
Status Pass Switch
No change
'ON'