Removal & Fitment Seat - Bajaj Pulsar 135 BS VI Owner's Manual

Removal & Fitment of Seat
Seat Release Cable
Removal of Seat- Front & Rear
(Split seat model)
• Remove 'Side Cover' LH.
• Pull rear seat lock cable (A) & remove 'Rear Seat'
• Similarly pull the front seat lock cable (B) & remove
'Front Seat'.
CAUTION: Always remove Rear seat first.
Follow procedure as given below-Single seat
Removal of Seat assembly complete
• Remove 'Side Cover' LH.
• Pull seat lock cable (A) & remove the seat complete.
A
B
Fig. B
Lug
Lock
Fig. C
Fitment of Seat- Front & Rear
(Split seat model)
• Both the seats can be fitted by matching their lug
with the respective lock & pressing down the lug into
lock.
CAUTION : Always fit Front seat first.
Follow procedure as given below-Single seat
Fitment of Seat assembly complete
• The seat assembly can be fitted by matching its lug
with the lock & pressing down the lug into the lock.
13
Lug
Lock