Adjusting The Volume; Attenuating The Sound; Monitor Panel Operations - Kenwood DDX7019BT Instruction Manual

Basic Operations Basic Operations

Adjusting the volume

DDX7019BT DDX719WBT
DDX7019BTM DDX719WBTM
DMX7019BT DMX719WBT
DMX7019BTM DMX719WBTM
You can adjust the volume (00 to 40) by pressing
K
increase and pressing to decrease.
• Holding J increases the volume continuously to
level 15.

Attenuating the sound

DDX7019BT DMX7019BT
DDX7019BTM DMX7019BTM
(Hold)
The ATT indicator lights up.
To cancel attenuation:
• DDX7019BT/DDX7019BTM/DDX719WBT/
DDX719WBTM/DMX719WBT/DMX719WBTM: Press
and hold the same button again.
• DMX7019BT/DMX7019BTM: Press the same button
again.

Monitor panel operations

1
Display the <Angle Adjust> screen.
DDX7019BT
DDX7019BTM
DMX7019BT/DMX7019BTM/DDX719WBT/
J to
DDX719WBTM/DMX719WBT/DMX719WBTM:
Press MENU on the monitor panel to display the
pop-up short-cut menu, then touch [Angle].
2
Perform the adjustment or operation.
DDX719WBT
DDX719WBTM
DMX719WBT
DMX719WBTM
E.g. Angle adjust screen for DDX7019BT
(Hold)
[0] – [6] Selects a monitor angle.
(The monitor panel will stay in
this angle when you turn on
the unit.)
<Off Position> Sets the angle of the monitor
when the ignition switch of the
vehicle is turned off or when
you turn off the unit.
• Select the monitor angle,
then touch [Memory].
[ M DISC EJECT] (Only for DDX7019BT/
DDX7019BTM/DDX719WBT/
DDX719WBTM)
Ejects the disc.
To return the monitor panel to
the selected angle:
DDX7019BT/DDX7019BTM:
Press M on the monitor panel.
DDX719WBT/DDX719WBTM:
Touch [Close].
• To return to the previous screen, touch [
setting screen.
] on the
ENGLISH 5