Kenwood DDX7019BT Instruction Manual page 37

Settings Settings
3 Select the crossover network mode.
[2way] Select this when 2-way speaker
system is used (front/rear).
[3way] Select this when 3-way speaker
system is used (tweeter/mid range/
woofer).
A confirmation message appears. Touch [Yes].
Setting the speakers and crossover
frequency
1
Select a car type ( 1 ), select a speaker
( 2 ) (front speakers, rear speakers, or
subwoofer) to set, then location* and
speaker/tweeter size ( 3 ) of the selected
speaker.
A selection window appears for each setting. Select
an item, then touch [Close] to close the window.
Speaker Select
Car Type
Speaker
Location
Tweeter
X'over
Medium
• Repeat steps 2 and 3 to set all speakers.
• Adjustable items vary depending on the selected
speaker type.
• When a speaker is not connected, select [None].
• When setting the front speakers, also select the
speaker size for <Tweeter>.
* Speaker location selection is available only when <X'over
Network> is set to [2way].
2
Touch [X'over] to display the <X'over>
screen.
3
Select the speaker type ( 1
the crossover frequency ( 2
selected speaker.
X'over
Front Rear Subwoofer
HPF FREQ
100 Hz
Slope
-6 dB/Oct
Gain
0 dB
TW Gain
-1dB
E.g. When <X'over Network> is set to [2way]
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
• Speaker types shown on the screen differ
depending on the <X'over Network> setting.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Gain>
Adjusts the output volume of the selected speaker.
), then adjust
<TW Gain>
) of the
Adjusts the output volume of the tweeter.
<Phase Inversion>
Activates the phase inversion for the speaker.
• To deactivate, touch [Phase Inversion] again.
<Equalizer>
The following adjustments are memorized for each
source until you adjust the sound again. If the source
is a disc, the adjustments are stored for each of the
following categories.
• DVD/VCD
• CD
• Audio/video files (Pages 55 – 56)
You cannot adjust the sound when the unit is in
standby.
ENGLISH 35