Camera Settings - Kenwood DDX7019BT Instruction Manual

Settings Settings

Camera settings

Display the <Camera> screen.
On the Home screen, touch as follows:
Then, on the <SET-UP> screen, touch [Camera].
<R-CAM Interruption>
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF: Select this when no camera is connected.
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
• OFF: Hides the parking guidelines.
42 ENGLISH
<Guidelines SETUP>*
Adjust the parking guidelines according to the size of
the car, parking space and so on.
When adjusting the parking guidelines, make sure to
use the parking brake to prevent the car from moving.
Touch one of the marks (1), then adjust the
position of the selected mark (2).
Initialise
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch [Initialise] to set all the marks to the initial
default position. A confirmation message appears.
Touch [Yes].
* Selectable only when <Parking Guidelines> is set to [ON].
(Page 42)
<Front Camera>
• ON: Activates the front view camera. Select this to
use the front view camera.
• OFF (Initial): Select this when no camera is
connected.
<Front Camera Interruption>*
Set the duraton (in seconds) to display the picture
from the front view camera when you shift the gear
from reverse (R) position to any other positions.
• OFF/5 sec/10 sec/15 sec (Initial)/20 sec
After the selected time, the screen returns to the
previous screen.
* Selectable only when <Front Camera> and <R-CAM
Interruption> are set to [ON].
<Front Camera Mirror Image>*
• ON: Displays the picture from the front view camera
horizontally reversed.
• OFF (Initial): Displays the picture from the front view
camera as it is.
* Selectable only when <Front Camera> is set to [ON].