Other External Components; View Camera - Kenwood DDX9905S Instruction Manual

Other External Components

View Camera

NOTE
• To connect a camera, see P.94.
• To use a rear view camera, a REVERSE lead
connection is required. (P.93)
• If [Rear Camera Interruption] is active the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ
Display the camera screen
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Camera].
h View camera screen appears.
h
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
3
Switching the View Camera *
1
Touch to change the front view camera or
dashboard camera and rear view camera.
Camera off
2
Touch to exit the camera screen.
Switching the Guideline *
3
Touching each time turns on or off the
guideline.
Switching the Angle *
4
Touching each time changes camera angles:
1
4
2
1
2
2
Other External Components
*1 When the front camera or dashboard camera,
and rear camera are connected with this unit.
*2 When CMOS-3xx series is connected with
this unit.
Ñ
Camera Setup
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP Menu screen appears. h
3
Touch [Camera].
h Camera screen appears. h
4
Set each item as follows.
[Rear Camera Interruption]
■
[ON]: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
[OFF ](Default): Select this when no camera is
connected.
[Rear Camera Settings *]
■
Adjusts the CMOS-3xx series with ID 1 ("Rear
Camera") set. For details, see the instruction
manual of your camera.
[Parking Guidelines]
■
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
[Guidelines SETUP]
■
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.70).
[Front Camera]
■
[ON]: Select this when the front camera is
connected.
[OFF ](Default): Select this when no camera is
connected.
1
69
English