External Audio Sources; Specifications - Blaupunkt MIAMI Miami CD72 Operating Instructions Manual

EXTERNAL AUDIO SOURCES

External audio sources
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output. The
audio source can, for example, be a
portable CD player, MiniDisc player or
MP3 player.
The AUX input must be activated in the
setup menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
Press the MENU button 8.
Press the softkey 4 assigned to
the "SETP" display item.
Press the softkey 4 assigned to
the "AUX1" or "AUX2" display item
for the input that you want to switch
on/off.
The AUX menu is displayed.
Note:
If a CD changer is connected, you can-
not change the "AUX1" input.
Press the softkey 4 assigned to
the "ON" or "OFF" display item to
switch the input on/off.
Note:
If the AUX input is switched on it can be
selected by pressing the SOURCE but-
ton ;.

SPECIFICATIONS

Specifications
Amplifier
Output power:
Tuner
Wavebands:
FM :
MW :
LW :
FM frequency response:
CD
Frequency response:
Pre-amp out
4 channels:
AUX input
Input sensitivity:
Subject to changes!
4 x 26 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
87.5 – 108 MHz
531 – 1,602 kHz
153 – 279 kHz
30 - 16,000 Hz
15 - 20,000 Hz
4 V / 10 kΩ
1.2 V / 10 kΩ
61