External Audio Sources; Connecting External Audio Sources; Switching On The Rear Aux Input And Front Aux-In Socket (Auxiliary) - Blaupunkt Seattle MP57 Operating And Installation Instructions

Cd mp3 wma
Hide thumbs Also See for Seattle MP57:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

External audio sources

Connecting external audio
sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device in two
ways:
1.
Via the rear AUX input (if no CD changer
is connected to the device).
Notes:
An adapter cable is needed to con-
nect an external audio source via the
rear AUX input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
As soon as the rear AUX input is
switched on, it can be selected with
the SOURCE button 4 (to switch
on the rear AUX input, please read
the following section). "AUXILIARY 1"
then appears on the display.
2. Via the front AUX-IN socket.
DANGER!
Increased risk of injury from
connector.
In case of an accident, the protruding con-
nector in the front AUX-IN socket may cause
injuries. The use of straight plugs or adapt-
ers can lead to an increased risk of injury.
For this reason, we recommend using an-
gled jack plugs, e.g. the Blaupunkt acces-
sories cable (7 607 001 535).
Note:
As soon as the front AUX-IN socket is
switched on in the settings and an ex-
ternal audio source is connected, it
can be selected with the SOURCE but-
ton 4 (to switch on the front AUX-IN
socket, please read the following sec-
tion). "AUXILIARY 2" then appears on
the display.
Switching on the rear AUX
input and front AUX-IN socket
(Auxiliary)
For external audio sources to be played
back via the rear AUX input and the front
AUX-IN socket, they must be switched on in
the settings.
u
Press the MENU button A.
The menu is displayed.
u
Press the softkey "Aux Settings" :.
The "Aux" menu is displayed.
To switch the rear AUX input on or off,
u
press the softkey "Auxiliary 1" ;.
: The rear AUX input is switched on.
: The rear AUX input is switched off.
To switch the front AUX-IN socket on or off,
u
press the softkey "Auxiliary 2" 6.
: The rear AUX input is switched on.
: The rear AUX input is switched off.
Note:
You can replace the factory-set wallpa-
per, which is shown on the display for
the AUX audio source, with your own.
External audio sources
41

Advertisement

Table of Contents
loading

Table of Contents