Bissell OptiClean 60A4 Series User Manual page 22

O
perations
Power cord
The power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
There is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.
Automatic cord rewind
Your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button OFF and grasp the plug to
disconnect from the electrical outlet. Hold the
plug and press the automatic cord rewind but-
ton to rewind the cord automatically.
Power button
Turn the power on or off by pressing lightly
downward on the power button ( O ).
CAUTION:
Before using your vacuum,
make sure that either the dirt
cup or a dust bag and all filters
are in place. Do not operate
your vacuum without the dirt
cup or dust bag and filters.
6
w w w . b i s s e l l . c o m
CAUTION:
Be careful to avoid injury as
cord retracts very quickly.
Power Button
Automatic
Cord
Rewind
Button