Bissell OptiClean 60A4 Series User Manual

Cyclonic bagless canister vacuum 220-240v
Hide thumbs Also See for OptiClean 60A4 Series:

Advertisement

Quick Links

OptiClean
U S E R ' S G U I D E
6 0 A 4 S E R I E S 2 2 0 - 2 4 0 v
Safety Instructions
3
Product View
4
Assembly
5
Operations
6-8
Maintenance and Care
9-12
Troubleshooting
13
Consumer Services
14
Replacement Parts
15
Warranty
16

Advertisement

Table of Contents
loading

Summary of Contents for Bissell OptiClean 60A4 Series

  • Page 1 OptiClean ™ U S E R ’ S G U I D E 6 0 A 4 S E R I E S 2 2 0 - 2 4 0 v Safety Instructions Product View Assembly Operations Maintenance and Care 9-12 Troubleshooting Consumer Services...
  • Page 2 Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL canister vacuum is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
  • Page 3: Important Safety Instructions

    (spares may be obtained from presence of explosive liquids or vapour. your BIssell supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock Do not use appliance in an enclosed space filled with ■...
  • Page 4: Product View

    roduct view Handle Air Flow Regulator Flex Hose Carry Handle Swivel Hose Telescoping Extension Wand Easy Empty Dirt Cup Clean Filter Indicator Power Brush Switch Button Automatic Cord Rewind Button Post-Motor HEPA Media Filter Variable Suction Power Control Multi-Surface Floor Nozzle cAUtIon: Do not plug in your Upholstery Tool...
  • Page 5: A Ssembling Your Vacuum

    ssembling your vacuum Connect swivel hose by squeezing both locking WARnInG: buttons and inserting it into the suction opening on the canister. Once the swivel hose is inserted in the Plastic film can be dangerous. suction opening, release the locking buttons. to avoid danger of suffocation, Connect telescoping extension wand to the handle keep away from babies and...
  • Page 6 perations Power cord the power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. there is also a red line, which indicates the end of the usable cord.
  • Page 7: Special Tools

    Special tools Tip: your bISSEll opticlean is not only a powerful carpet and rug vacuum cleaner, it’s Before cleaning under also a versatile bare floor vacuum cleaner and low furniture, check above floor vacuum cleaner when you select area first for objects that might harm the one of the special tools.
  • Page 8 Bagless or bagged vacuum option the bISSEll opticlean is a unique vacuum that offers the option to vacuum using a bagless dirt cup or a traditional paper bag. to use as a bagless vacuum, simply place the dirt cup inside the vacuum cleaner.
  • Page 9: Dust Bag Replacement

    aintenance and care Emptying the dirt cup Unplug the vacuum from electrical outlet. Open the dirt cup/dust bag compartment by lifting up on the latch on the door on the front of the vacuum. Lift the dirt cup assembly out from the vacuum. Remove the top cover from the dirt cup assembly by unfastening the latch, raising the front edge and removing the top cover off of...
  • Page 10: Cleaning The Pre-Motor Filter

    aintenance and care Dust bag replacement continued Slide the new dust bag into the holder by inserting the dust bag into the tabs located at the bottom of the holder. Then press the dust bag holder clip, insert the dust bag and release the dust bag holder clip to hold the dust bag in place.
  • Page 11 aintenance and care Replacing the post-motor HEPA media filter the post-motor HEPA media filter assists in the filtration process to return clean air to the room. Unplug the vacuum from electrical outlet. Remove the filter door (located on the back of the vacuum) by pulling down on the filter door and pulling it toward you.
  • Page 12 aintenance and care Replacing the dirt cup HEPA media & cleaning the foam filter continued The dirt cup foam filter is located between the bottom of the dirt cup and the HEPA filter. Once the HEPA filter has been removed, the foam filter can then be removed and cleaned or replaced as needed.
  • Page 13: Troubleshooting

    Please do not return this product to the store. w w w . b i s s e l l . c o m...
  • Page 14 42 Rocco Drive Scoresby 3179 Victoria Australia 0844-888-6644...
  • Page 15 - BISSELL OptiClean Item Part no. Part name 203-7289 Dirt Cup Assembly 203-7259 Dirt Cup hePA media Filter 203-7258 Dirt Cup Foam Filter 203-7263 Dust Bag (3pk) 203-7260 Pre-motor Filter 203-7261 Post-motor hePA media Filter 203-7267 Floor Nozzle...
  • Page 16 42 Rocco Drive Scoresby 3179 Victoria Australia 0844-888-6644...

This manual is also suitable for:

Opticlean

Table of Contents