Bissell OptiClean 60A4 Series User Manual page 21

a
ssembly
1. Connect swivel hose by squeezing both
locking buttons and inserting it into the
suction opening on the canister. Once
the swivel hose is inserted in the suction
opening, release the locking buttons.
2. Connect telescoping extension wand
to the handle end of the flex hose.
Twist slightly to tighten.
3. Connect floor nozzle to the end of
the telescoping extension wand. Twist
slightly to tighten.
4.
Once assembled, you can store your
vacuum in one of two positions:
A. Storing in the in-use position:
1. To store with the floor nozzle
attached, insert the storage clip
(located on the back of the floor
nozzle) into the storage slot on
the rear of the vacuum.
2. To store without the floor nozzle
attached, insert the storage clip
(located on the bottom of the
telescoping extension wand)
into the storage slot on the rear
of the vacuum.
B. Storing in the upright position:
1. To store with the floor nozzle
attached, stand the vacuum in the
upright position and insert the
storage clip (located on the back
of the floor nozzle) into the storage
slot on the bottom of the vacuum.
2. To store without the floor nozzle
attached, stand the vacuum in the
upright position and insert the
storage clip (located on the bottom
of the telescoping extension wand)
into the storage slot on the bottom
of the vacuum.
w w w . b i s s e l l . c o m
WARNINg:
Plastic film can be dangerous. To
avoid danger of suffocation, keep
away from babies and children.
1.
3.
Storing in the in-use position
A1 A2
Storing in the upright position
B1
2.
B2
5