Setting The Following Distance In Acc - Dodge CHALLENGER 2020 Owner's Manual

The ACC system applies the brake down to

15 mph (24 km/h) when following a target
vehicle.
The ACC system maintains set speed when

driving uphill and downhill. However, a slight
speed change on moderate hills is normal. In
addition, downshifting may occur while
climbing uphill or descending downhill. This
is normal operation and necessary to main-
tain set speed. When driving uphill and down-
hill, the ACC system will cancel if the braking
temperature exceeds normal range (over-
heated).

Setting The Following Distance In ACC

The specified following distance for ACC can be
set by varying the distance setting between four
bars (longest), three bars (long), two bars
(medium) and one bar (short). Using this
distance setting and the vehicle speed, ACC
calculates and sets the distance to the vehicle
ahead. This distance setting will show in the
instrument cluster display.
Distance Setting 4 Bars (Longest)
Distance Setting 3 Bars (Long)
STARTING AND OPERATING
Distance Setting 2 Bars (Medium)
Distance Setting 1 Bar (Short)
To increase the distance setting, push the
Distance Setting — Increase button and release.
Each time the button is pushed, the distance
setting increases by one bar (longer).
171
5