Dodge CHALLENGER 2020 Owner's Manual page 120

118 SAFETY
Seat Belt Pretensioner
The front outboard seat belt system is equipped
with pretensioning devices that are designed to
remove slack from the seat belt in the event of
a collision. These devices may improve the
performance of the seat belt by removing slack
from the seat belt early in a collision. Preten-
sioners work for all size occupants, including
those in child restraints.
NOTE:
These devices are not a substitute for proper
seat belt placement by the occupant. The seat
belt still must be worn snugly and positioned
properly.
The pretensioners are triggered by the Occu-
pant Restraint Controller (ORC). Like the air
bags, the pretensioners are single use items. A
deployed pretensioner or a deployed air bag
must be replaced immediately.
Energy Management Feature
The front outboard seat belt system is equipped
with an Energy Management feature that may
help further reduce the risk of injury in the event
of a collision. The seat belt system has a
retractor assembly that is designed to release
webbing in a controlled manner.
Switchable Automatic Locking Retractors
(ALR)
The seat belts in the passenger seating posi-
tions are equipped with a Switchable Automatic
Locking Retractor (ALR) which is used to secure
a child restraint system. For additional informa-
tion, refer to "Installing Child Restraints Using
The Vehicle Seat Belt" under the "Child
Restraints" section of this manual. The figure
below illustrates the locking feature for each
seating position.
Vehicle With Rear Seating
ALR — Switchable Automatic Locking Retractor
Rear Seat Delete — Only Front Passenger Seat
Available
ALR — Switchable Automatic Locking Retractor
Passenger Seat Delete — No Automatic Locking
Retractor (ALR) Locations