Raising The Vehicle; Tires; Tire Safety Information - Dodge CHALLENGER 2020 Owner's Manual

266 SERVICING AND MAINTENANCE
Change Axle Fluid
Refer to "Scheduled Servicing" in "Servicing
And Maintenance" for the proper maintenance
intervals.
NOTE:
For race track usage it is recommended that the
axle fluid be changed every 4 hours of on track
time.

RAISING THE VEHICLE

In the case where it is necessary to raise the
vehicle, go to an authorized dealer or service
station.

TIRES

Tire Safety Information

Tire safety information will cover aspects of the
following information: Tire Markings, Tire Identi-
fication Numbers, Tire Terminology and Defini-
tions, Tire Pressures, and Tire Loading.
Tire Markings
Tire Markings
1 — US DOT Safety Standards Code (TIN)
2 — Size Designation
3 — Service Description
4 — Maximum Load
5 — Maximum Pressure
6 — Treadwear, Traction and Tempera-
ture Grades
NOTE:
P (Passenger) — Metric tire sizing is based on

US design standards. P-Metric tires have the
letter "P" molded into the sidewall preceding
the size designation. Example: P215/65R15
95H.
European — Metric tire sizing is based on

European design standards. Tires designed
to this standard have the tire size molded
into the sidewall beginning with the section
width. The letter "P" is absent from this tire
size designation. Example: 215/65R15 96H.
LT (Light Truck) — Metric tire sizing is based

on US design standards. The size designation
for LT-Metric tires is the same as for P-Metric
tires except for the letters "LT" that are
molded into the sidewall preceding the size
designation. Example: LT235/85R16.
Temporary spare tires are designed for

temporary emergency use only. Temporary
high pressure compact spare tires have the
letter "T" or "S" molded into the sidewall
preceding the size designation. Example:
T145/80D18 103M.
High flotation tire sizing is based on US

design standards and it begins with the tire
diameter molded into the sidewall. Example:
31x10.5 R15 LT.