Power Window Controls - Dodge CHALLENGER 2020 Owner's Manual

Cabin Air Filter
The climate control system filters out dust and
pollen from the air. Contact an authorized
dealer to service your cabin air filter, and to
have it replaced when needed.
Operating Tips Chart
CONTROL
WEATHER
SETTINGS
Set the mode control
to
blower on high. Roll
Hot Weather And
down the windows for
Vehicle Interior Is Very
a minute to flush out
Hot
the hot air. Adjust the
controls as needed to
achieve comfort.
Turn
on and set the mode
Warm Weather
control to the
position.
Operate in
Cool Sunny
position.
WEATHER
Cool & Humid
Conditions
Cold Weather
, on, and
WINDOWS
CONTROL
SETTINGS

Power Window Controls

Set the mode control
The window controls on the driver's door control
to and turn on
all the door windows.
to keep windows
clear.
Set the mode control
to the position. If
windshield fogging
starts to occur, move
the control to the
position.
There are single window controls on the
passenger door trim panel, which operate the
passenger door window. The window controls
will operate only when the ignition is in the ACC
or ON/RUN position.
NOTE:
For vehicles equipped with the Uconnect
system, the power window switches will remain
active for up to 10 minutes after the ignition is
placed in the OFF position. Opening either front
GETTING TO KNOW YOUR VEHICLE
Power Window Switches
53
2