Get Started; Basic Voice Commands; Radio; Media - Dodge CHALLENGER 2020 Owner's Manual

364 MULTIMEDIA

Get Started

All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
Helpful hints for using Voice Recognition:
Visit UconnectPhone.com to check mobile

device and feature compatibility and to find
phone pairing instructions.
Reduce background noise. Wind and

passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead. The micro-
phones are located in the vehicle headliner
above the driver and front passenger.
Each time you give a Voice Command, you

must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
You can interrupt the help message or

system prompts by pushing the VR or Phone
button and saying a Voice Command from
the current category.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call,
Send Or Receive A Text
2 — For All Radios: Push To Begin Voice Com-
mands
3 — Push To End Call

Basic Voice Commands

The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button on the steering wheel.
After the beep, say:
"Cancel" to stop a current voice session

"Help" to hear a list of suggested Voice

Commands
"Repeat" to listen to the system prompts

again
Notice the visual cues that inform you of your
voice recognition system's status. Cues appear
on the touchscreen.

Radio

Use your voice to quickly get to the AM, FM, or
SiriusXM® Satellite Radio stations you would
like to hear. (Subscription or included
SiriusXM® Satellite Radio trial required.)
Push the VR button . After the beep, say:
"Tune to ninety-five-point-five FM"

"Tune to Satellite Channel Hits 1"

TIP:
At any time, if you are not sure of what to say or
want to learn a Voice Command, push the VR
button and say, "Help". The system provides
you with a list of commands.

Media

Uconnect offers connections via USB,
Bluetooth®, and auxiliary ports (if equipped).
Voice operation is only available for connected
USB and AUX devices.
Push the VR button . After the beep, say one
of the following commands and follow the
prompts to switch your media source or choose
an artist.