Safely Remove Your T.sonic; Remove The T.sonic In Windows 98Se; Remove The T.sonic In Windows Me, 2000, And Xp; Remove The T.sonic In Mac Os - Transcend 610 User Manual

Before removing your T.sonic, please make sure the OLED Display is not in the
READ/WRITE status or unpredictable damage to the files or your T.sonic may
occur.

Remove the T.sonic in Windows 98SE

Unplug your T.sonic from your system directly when data is not transferring.

Remove the T.sonic in Windows Me, 2000, and XP

1. Select the icon on the system tray.
2. The Safely remove Hardware pop-up menu will appear. Select to continue.
3. A message box will appear: The 'USB Mass Storage Device' device can now be safely
removed from the system.

Remove the T.sonic in Mac OS

Drag and drop the Disk icon corresponding to your T.sonic into the trashcan. Then unplug your
T.sonic from the USB port.

Remove the T.sonic in Linux

Execute umount /mnt/ T.sonic to un-mount the device.
If your T.sonic ever stops responding or locks up, you can use the Recovery program to restore it
to its default settings. You can also use this function to update the unit's Firmware.
Running the Recovery program will erase all of the data currently on the T.sonic.
If there are bad blocks in the flash memory chip of the T.sonic, the memory size of your
T.sonic will be smaller than the original memory size after running the Recovery program.

Safely Remove Your T.sonic

Recover Your T.sonic

26