Trane DELUXE programable XT302C Owner's Manual page 41

5. Press Heat/Cool Settings to make selec-
Heat/Cool
tions for the opposite system setting (either
Settings
Heat or Cool).
NOTE: If your system is set for Heat, only
6. Press Increase
the desired temperature setpoint
displays.
the heating temperature will be used.
Similarly, if your system is set for
Cool, only the cooling temperature
will be used. If your system is set for
Auto, either the heating or cooling
temperature may be used depending
on the temperature of the room.
or Decrease
Set Program
Mon
Wake
By pressing Heat/Cool Settings, you select the cooling system
(if you already set the heating temperature). The current setting
displays. Example display shows the cooling system was
until
Set Program
Mon
Wake
By pressing Increase
cooling Wake temperature.Example display shows the
41
Setting
AM
Cool
Fan
Auto
M17060
previously set for 78 .
Setting
AM
Cool
Fan
Auto
M17061
or Decrease , you select the
cooling Wake period set for 76 .
Pub. No. 22-5127-04
69-1214