Trane DELUXE programable XT302C Owner's Manual page 15

The temporary temperature setting you select displays for approximately 3 seconds. The display reads
Temporary until the next period begins, or you cancel the Hold.
IMPORTANT
Run
Program
To cancel the Hold before the designated
time, press Run Program.
NOTE: If " " or " " appears under the temperature display, it means that both the heating and cooling
setpoints are being adjusted. Tapping the key changes both the heat and cool setpoints by one degree.
Press after the desired setpoint is reached to verify the setpoints.
NOTE: While in temporary operation, the thermostat uses conventional recovery for that period only . The
thermostat assumes you desire to maintain the temporary setting until the end of the period.
Mon
System
Heat
After selecting a temporary setting, display reads Temporary until canceled.
Example displays shows temporary heat setting of 70 at 6:00 AM.
15
Temporary
AM
Heat
Fan
Pub. No. 22-5127-04
69-1214
Auto
M12984