3. Press Increase
until the desired temperature setpoint
displays.
NOTICE:
This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference
Regulations, CRC c. 1374.
CAUTION
Equipment Damage Hazard.
Can cause permanent damage to the compressor or other equipment.
To avoid possible equipment damage, do not operate cooling when outside temperature is below 50 F
(10 C). See equipment manufacturer instructions. To avoid possible compressor damage, allow the
compressor to remain off for five minutes before restarting.
or Decrease
58
By pressing Increase
or Decrease
the cooling temperature. Example display shows Cool is set for 75 .
Setting
Cool
M17075
after pressing
, you select
Pub. No. 22-5127-04
69-1214