Speed Dials; Personal Speed Dials - 3Com NBX 3101SP Telephone Manual

76 C 6: P
HAPTER ERSONALIZING

Speed Dials

Personal Speed Dials

Y T
OUR ELEPHONE
Delayed Ringing works only when your administrator maps telephone
company lines directly to buttons on two or more telephones or
defines bridged station appearances. After that is done, you can alter
the delayed ringing pattern by changing the delay before ringing
occurs on the mapped line on your phone.
To edit a Delayed Ringing Pattern, go to Telephone Programming >
Button Mapping. The button mapped to the telephone line or
designated as a bridged extension will have the Type set to
Line/Extension
For the shared line appearance button, set the Ring box to the
behavior that you want. To have the telephone begin ringing after one
ring, select 1, after two rings, select 2. Select No to disable ringing
entirely. (The lamp still functions to indicate ringing/call status.) Do not
change the settings in the Type, Number, and Priority fields.
This section describes the types of speed dials:
Personal
System-wide
One-Touch
It also describes how you can print a list of speed dials. You can also print
a set of labels for your telephone, showing which of your buttons are
mapped to features and speed dial numbers.
Although 3101 and 3101SP Basic Telephones each have two Access
buttons that can be made available by your administrator for One-Touch
speed dial numbers, these buttons are mapped by default as a Feature
button and a Transfer button. Changing the settings for the Feature or
Transfer button greatly reduces your ability to use some of the NBX
features.
You can create a list of up to 99 personal speed dials (using ID numbers
601 through 699) for your telephone. These speed dials are available only
from the telephone for which they were created.
You create, view, and print your personal speed dial list using the NBX
NetSet utility. You can view and dial a personal speed dial number using
the telephone display panel of a 3Com Telephone.