Table of Contents
Advertisement
Before installation, check and confirm if water heater power, electricity meter and wiring match up with
each other.
The heat pump water heater should be grounded reliably. It is prohibited to connect the earth wire to
neutral wire or tap water pipe.
Water of 50℃ or above may have risk of scald. Please check water temp by hand and use water mixing
valve to get water in appropriate temperature.
Be cautious about the hot water discharge through temperature and pressure safty valve, as it may have
risk to cause scald.
For indoor installation, it is normal that the air outlet grill may have a little condensate water if the
indoor environment temperature and humidity is at a higher level.
The display panel needs to be installed indoors, and waterproof measures must be taken if installed
outdoors.
ITEM
Packing list
DESCRIPITION
1
Tank of water heater
2
Fixed plate of controller
3
4
Silicon rubber sealing ring
5
Drain pipe
6
Water pipe nipple
7
Temperature and pressure relief
8
Check valve
9
Drain valve
10
Notice
Screw
valve
Manual
14
QTY
1
1
2
4
1
2
1
1
1
1
Advertisement
Table of Contents
