Dip Switches - Toyota Expert EPS9000 Instruction Manual

DIP SWITCHES

DIP switch ON or OFF is set as follows:
DSW2
DSW1
FD07
DSW 2
No. Function
8 PC connection
7 Not used
6 Not used
5 Not used
Satin stitch width
4
adjustment
Satin stitch adjust-
3 ment mode selec-
tion
Program install
2
device selection
1 Installation mode
DSW 1
No. Function
8 Start-up speed
7 Not used
6 Not used
5 Not used
Hoop travel direc-
tion: Arrow symbols
4
and actual travel
direction
3 Buzzer sounds
Language in LCD
2
display
1 Test mode
After changing the setting of a DIP switch, turn the power switch off once and then
turn it back on.
*
: Factory-setting made before shipping
Access to the Embroidery Information
In the test mode, you can access to the following
information:
● Accumulated number of embroidered pieces of cloth
● Accumulated number of stitches
● Accumulated number of error displays and others
Consult your TOYOTA dealer for more details.
13
OFF
Two-way communica-
*Standard
tions
*Select OFF.
*Select OFF.
*Select OFF.
*Adjustment for stitch
Adjustment for stitch
width of 1.5 mm or
width of 0.6 mm or larger
larger
*Collective adjustment Independent adjust-
for X- and Y-axis ment for X- and Y-axis
*FD PC
Installation mode if
*Normal mode
DSW1-1 is ON.
OFF
*Standard High speed
*Select OFF.
*Select OFF.
*Select OFF.
*Same direction as indi- Opposite to the direction
cated by the arrow indicated by the arrow
symbol symbol
*10 times 1 time
*English Japanese
*Normal operation Test mode
ON
−
−
−
ON
−
−
−