Grill Installation And Removal - Lopi 864 CF 40K GSR2 Owner's Manual

Grill Installation and Removal

Some fireplaces may use grills above and below the glass. See the instructions below to remove.
Note:
Upper Grill Installation (Standard Grill)
Hold the grill at an angle and insert the
lower slot over the lower bushing on
the fireplace (both sides). The grill fits
inside the tabs for the barrier screen.
Lower Grill Installation
Hold the grill at an angle and insert the lower
slot over the bushing on the fireplace (both
sides). You may need to press on the grill to
get the tab over the bushing (this prevents
the grill from accidentally falling off).
© Travis Industries
Install the barrier screen before attaching the grills.
Swing the grill upwards to engage the upper slot. You
will need to lift the grill slightly to get it over the bushing.
Once in place the grill is held in place by gravity.
Bend the tab outward on
both sides. This is the
end-stop for the lower grill,
it allows the grill to swing
forward.
Maintenance
Upper Grill Installation (Louvered Grill)
NOTE: The upper grill is difficult to install the first time - be
patient, after you install it, you will know how it installs and it
will be much easier the second time.
SIDE VIEW
Heat Shields
(on fireplace)
Position the grill
so the slots on
the grill align with
the mounting
studs.
2/6/2019 - 1485
Mounting Stud
Upper Grill
You may need to
push in and
upwards on the
grill as it inserts.
Swing the grill upwards to engage the upper slot.
The grill fits inside the tabs for the barrier screen.
You will need to lift the grill slightly to get it over the
bushing. Once in place the grill is held in place by
gravity.
17
The grill, when
fully inserted,
will slide down
and "click" into
place.
864 GSR2 Op Man