Job Aid - Avaya ERS 3500 Series Manual

Installing the sfp, sfp+, and xfp transceivers on ethernet routing switch

Hide thumbs Also See for ERS 3500 Series:

Table of Contents

SFP transceivers

Job aid

Depending on the transceiver manufacturer, the SFP transceiver can use different types of

locking and extractor mechanisms.

The following figures show typical mechanisms used on SFP transceivers; other locking and

extractor mechanisms exist, although they are not shown here. In the following figure, the SFP

still uses the bore plug. Pull the bail to release the device.

The following figure shows the 1000BASE-SX MT-RJ SFP. Push the tab to release the

device.

The following figure shows the wrap-around latch-type extraction mechanism. To remove the

device, push the collar towards the module.

Installing the SFP, SFP+, and XFP transceivers on Avaya ERS 3500 Series

Comments? infodev@avaya.com

March 2014

Table of Contents