EverFocus eZ.HD ELUX4 Quick Installation Manual page 7

eZ.Controller: Easily control eZ.HD camera's OSD at the DVR end.

Traditionally, the CCTV installer needs to take a portable monitor to connect to the camera
for controlling the camera OSD at the camera installation site as the
take extra effort, time and people to adjust the camera.
Now, EverFocus' eZ.Controller allows users to control the camera OSD simply on the monitor
at the DVR end as illustrated in
A Traditional Way to Control Camera OSD
Control Camera OSD at
DVR End
How to Control eZ.HD Camera's OSD at the DVR End?
1. On the DVR's OSD setting menu, go
to System > Camera > Adjust. Select
a camera you want to adjust.
2. Click the Advanced button, and the
camera live view with the UTC Panel
will be displayed.
ELUX4 / ELUX8 / ELUX16 Full HD Hybrid DVR
Diagram B.
B
Camera End
Camera End
3.
4.
5.
6
Diagram A
Use eZ.Controller to Control Camera OSD
Camera OSD Control Directly at
DVR End
To display the OSD menu, click the
Enter button on the UTC Panel.
You can use the direction buttons on
the Coaxial Panel to control the
camera's OSD setting menu.
To exit the setting, click Exit to return
to the Adjust setting page.
below. It will
DVR End
Camera End