EverFocus eZ.HD ELUX4 Quick Installation Manual page 5

No
Name
Loop Video Output
1
(Optional)
2 Video Input
3 CVBS Port (BNC)
4 VGA Port
5 Audio Input (RCA)
6 LAN
7 Power Switch
8 Alarm Input / Output
9 Audio Output RCA
10 HDMI Port
11 USB2.0 Port
12 RS-485 Port
13 Power Port
ELUX4 / ELUX8 / ELUX16 Full HD Hybrid DVR
Description
The DVRs support 4 (4CH DVR) / 8 (8CH DVR) / 16 (16CH DVR)
looping outputs. You can use the optional Loopout Cable to
connect to the monitors. Please refer to 3.1 Monitor Connection.
Connect up to 4 / 8 / 16 analog HD or SD cameras to any
channels using the coaxial cables.
Note:
1. The DVR can automatically configure itself as NTSC or PAL.
To do this, connect a camera to any channel of the DVR.
The DVR will detect the first connected camera format
(NTSC or PAL) and then automatically configure itself to the
detected format from the first connected camera. For
example, if the format of the first connected camera is
NTSC, the DVR will configure itself to NTSC format.
2. All video inputs are compatible with all resolution types of
cameras, such as 1080p, 720p, 960H and D1 (HD-CVI /
HD-SDI cameras are not supported).
This can be used as a Call monitor output. Connects to the Call
monitor using a BNC cable (see 3.1 Monitor Connection).
This can be used as a Main monitor output. Connects to the
monitor using a VGA cable (see 3.1 Monitor Connection).
Connects to the audio input devices. Note that the microphone
with a (built-in) amplifier and external power supply is required.
Connects to the Network.
Press to turn on or off the power.
Connects to alarm input and alarm output devices. You can also
connect to the radio-controlled clock for time synchronization.
Please refer to 3.2 Alarm I/O.
Connects to the audio output devices, such as speakers. Note
that the speaker with a (built-in) amplifier and external power is
required.
This can be used as a Main monitor output. Connects to the
monitor using a HDMI cable (see 3.1 Monitor Connection).
The USB2.0 port for connecting to a mouse, external storage
device or EKB200 keyboard.
Connects to the RS-485 device, such as EverFocus' EKB-500
keyboard.
Connects to the DC 12V power source using the supplied Power
Cord.
4