Advanced Network Settings - Toshiba Strata CIX IP5000-UG-VC User Manual

Advanced Network Settings


To access the Advanced Network Setting screens
Hold
1. Press
2. Press Advanced softkey, the Advanced Setting screen appears.
There are three screens for Advanced Settings (shown below). Use the
Note
soft keys to move from one screen to another.
Advanced Setting
P-DNS : 0. 0. 0. 0
S-DNS : 0. 0. 0. 0
GRQ Port : 0
RRQ Port : 0
AP Addr : 0. 0. 0. 0
[Set] (1/3)
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations screen without rewriting the NV-RAM
data.
Strata CIX IP5000-series Telephone UG
3 6 9
+ + + (simultaneously).
Admin_U : 0. 0. 0. 0
Admin_L : 0. 0. 0. 0
User ID : 9999
Password : ****
Dynamic Port
[Cancel] [Set]
Config
07/09
Advanced Setting
(2/3) [Cancel]
Config
Administrator Programming
IP5131-SDL Settings
Advanced Setting
VLAN : Disable
Phone VLAN ID : 1
PC Port Type: Access
PC Port VLAN ID : 1
VLAN : Disable
[Set] (3/3) [Cancel]
Config
and
145