Advanced Network Settings
To access the Advanced Network Setting screens
Select the CONFIG tab, then Advanced soft key.
Note
There are two screens for Advanced Settings (shown below). Use the "
"
" soft keys to move from one screen to another, and to go back to the
Configurations main screen.
P-DNS :0.0.0.0
S-DNS :0.0.0.0
GRQ Port:0
RRQ Port:0
AP Addr:0.0.0.0
[SET] (1/2) [CANCEL]
The general operation on the Network Settings screens is as follows:
• To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.
• Press the SET soft key to rewrite the NV-RAM data if any setting of a minor item
is changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)
• Press the SET soft key to go to the Configurations Screen without rewriting the
NV-RAM data if no setting change of a minor item is made.
• Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the Configurations Screen without rewriting the NV-RAM data.
Strata CIX Telephones Administrator Manual
Advanced Setting
PHONE
CONFIG
WEB
Screen 1
06/06
IPT2008-SDL Settings
Configurations
Advanced Setting
Admin_U:0.0.0.0
Admin_L:0.0.0.0
USER ID :9999
PASSWORD:****
PHONE
CONFIG
WEB
Screen 2
" and
31