Toshiba Strata CIX IP5000-UG-VC User Manual page 196

Table 24 Programmable Feature Button Definitions (continued)
Button Definitions
Release and
Release and Answer – Press to disconnect or complete the transfer the current outside or
Ans
extension call and automatically answer the new incoming outside or extension call.
Release – Press to disconnect or complete the transfer of the current outside or extension call
Release Call
and to place your station in the idle condition.
SD or
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD buttons can be
Customized
Button
used as either System Speed Dial numbers or Station Speed Dial numbers.
Spd Dial Lng
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial numbers.
Pause
Spd Dial
Pause – Press to set either a one-half or two-second pause when programming Speed Dial
Pause
numbers. (The pause time is set in system programming).
Start
Start – Press to make an outgoing call using an ISDN trunk.
Sub
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Tel Set
Background Music – Press to turn Background Music on or off over your station speaker.
Music
Tone Dial
Tone – Press to change the outgoing dialing of the outside line in use from dial pulse to tone
Select
signaling.
Unlock Door
Door Unlock – Press to unlock a door lock mechanism.
Table 25 Programmable Feature Button Labels
Feature
Code
Name
Unused
000
Key
Prime DN
100
Key
Secondary/
110 Phantom
DN Key
Strata CIX IP5000-series Telephone UG
1 2 3 4 5 6
E x t . x
E x t . x
07/09
7 8 9 10 11 12
x x x x
x x x x
LCD User
Default Can
Label Rename
Ext.
XXXXX Yes
(CLID)
Ext.
XXXXX Yes
(Caller ID)
178