Table of Contents
Advertisement
Programming with DSC
Alter access code
Use the access code to gain access to the
important menu items.
This code is set to "0000" at the factory.
Be sure to make a note of the new code
if you change it.
Enter the old code (in this case "0000") and
press OK.
Enter the new code, press OK. Enter the
new code again and press OK again.
Master clear
Using this menu item you can delete the
telephone settings.
You can also delete the SIM card settings.
Please be careful when using this function!
Telephone – Setup menu
The following settings will be deleted:
a) Phone
Speed-dial directory
Call charges setting
Call counter
b) SIM card
Speed-dial directory
Redial memory
Own phone numbers
Mailbox numbers
SMS messages
AOC
Fixed telephone numbers
Preferred networks
Preferred language.
If this menu item is selected, you will be re-
quired to enter the access code after press-
ing OK. Enter the access code, press OK.
Then select "Card" or "Phone" by pressing
<< / >>.
"Clear phone memory?" or "Clear card?" will
appear in the display.
Press CL if you want to cancel the process.
Do not press OK unless you want to do a
"Master clear", "cleared" will appear in the
display.
The process has been completed when
"Master clear" appears in the display.
External alarm
If the ignition is switched off, you can have
an incoming call signalled by the car's horn
or flashing lights in addition to the ringing in
the car.
For this to operate, you must first
press << / >> to switch the function
"External alarm" to ON in the DSC
menu.
Switch off the unit with the ignition and
switch it on again by pressing the ON
button.
If an incoming call is detected, the external
alarm will sound five times in succession.
To protect the vehicle's battery power, the
unit will switch off automatically after one
hour.
If necessary you can switch on the external
alarm again for one hour by pressing the
ON button.
Refer to the installation instructions for con-
nections and accessories.
117
Advertisement
Table of Contents
