Table of Contents
Advertisement
Operating the telephone
Making your first telephone call
When the telephone is ready to operate, an
antenna symbol will appear in the display
(must not flash).
A trained SIM card must be inserted in the
unit correctly. If the equipment is not cur-
rently in the telephone mode
•
press
briefly.
•
Dial the number you wish to call using
the number keys.
After you have entered the telephone
number correctly,
•
press
briefly.
The telephone will now place the call auto-
matically.
To end your telephone call:
•
Press
briefly.
GSM emergency calls
The emergency number in the GSM net-
work is 112 anywhere in the world.
By dialling 112 you can place an emergen-
cy call, regardless of whether or not you
have inserted a SIM or KeyCard.
Any barring codes entered in the system will
not affect the 112 number. It is possible to
place an emergency call as long as the an-
tenna symbol is flashing and the signal is
strong enough.
To place the call:
•
Switch the set on, insert the KeyCard
or SIM card. If you do not enter a card,
you must complete the following oper-
ating steps within the next 4 seconds.
•
Press
.
•
Dial 112 and press
.
"Emergency" will appear in the display and
the telephone will place the call.
Important!
Do not use the emergency call number un-
less there really is an emergency.
When placing an emergency call, be sure
to supply all the necessary information as
accurately as possible. Remember that your
mobile telephone may be the only means of
communication at the scene of an accident.
Do not hang up until you are told to do so.
97
Advertisement
Table of Contents
