Table of Contents
Advertisement
Method Sequence Table Parameters
Page 1 (table)
Method
entries
1, 2, ..., 8
default
1
Page 1 of 2
Method
1
2
3
Page 2
Use Prep-Ahead
(if Both selected in Setup)
First Injector Used
Use Injection Delay?
Delay Between Injections (min)
Advance for Second Injection?
Clean Between Injections?
Note that the Page 2 Parameters are only used if Both is selected
for the Inj Pos parameter.
The vial range can be set to any combination of vial positions in
ascending order. A range of 1 vial is allowed, thus a range of 1 to 1
means use Vial 1 with the specified method. The default value is 0 to 99
for the CP-8400 and 1 to 21 for the CP-8410.
The number of injections per sample may be set between 1 and 99; the
system will inject the specified number of replicates. If a priority sample is
invoked, the system will remember the number of completed replicates
and return to the next replicate after the priority request is completed.
The default value is 1.
32
* denotes CP-8410
Vial Range
Inj/Samp Inj Vol 2
0 to 99
1 to 99
(1 to 21)*
0 to 99
1
(1 to 21)*
Init
Final
1
20
21
38
70
98
Yes/No
Pos. 1, Pos. 2
Yes or No
0.5-10.0
Yes or No
Yes or No
Inj Vol 1
0.1 to 5, 10
0.1 to 5, 10
or 1 to 100
or 1 to 100
1.0
1.0
Inj/
Inj
Samp
Vol 1
3
0.5
2
2.0
1
1.5
default = No
default = Pos. 1
default = No
default = 1
default = Yes
default = No
Inj Pos
1, 2, or
Both
1
Inj
Inj
Vol 2
Pos
----
1
1.0
Both
----
2
03-914852-00:4
Hide quick links:
Advertisement
Table of Contents
